Configure Channels > Example
| Keystrokes | Comments |
| F5 | "F5" activates the channel configuration function. |
| SPACEBAR | Toggles Channel 1 active/inactive. |
| →→ | Moves to Channel 3 |
| SPACEBAR | Toggles Channel 3 active/inactive. |
| ENTER | Exits Channel Configuration. |
For Serial Port Products Only
Accelerator key version
|
Keystrokes |
Comments |
|
F5 |
"F5” activates the channel configuration function. |
|
2 4 7 5I 1D 8D
|
Add single-ended channels 2, 4, 7, digital channel 5, and differential channels 1 and 8 to the list. Note that and ENTER keystroke must follow each channel entry. |
|
-2 |
Remove channel 2 from the list. |
|
15 |
Attempting to add single-ended channel 15 to the list. |
|
7D |
Changing single-ended channel 7 to differential. Removes single-ended channel 15 from the list since this channel number is required to form the differential pair for channel 7. |
For All Other Products
Accelerator key version
|
Keystrokes |
Comments |
|
F5 |
“F5” activates the channel configuration function. |
|
SPACE BAR |
Deactivates channel 1. |
|
→→→→→→+ |
Activates channel 8 and designates it as differential (channel 8 is designated + and channel 16 -). |
|
→ SPACE BAR |
Activates single-ended channel 10. |