Configure!

After you have made all the changes required for your application you must send the configuration data to the instrument.

1. Make sure your device is connected through the USB port or Ethernet connection (via network or world wide web).
2. Verify that all desired settings display in the main window.
3. Press the Configure Button.

Progress is shown with channel numbers changing to red successively from the first enabled channel to the last. Do not remove the USB cable during configuration. A Success box will appear when configuration is complete. Configuration could take several minutes depending on PC speed and connection.

Note: WinDaq Acquisition does not use these settings. Opening WinDaq Acquisition will open WinDaq's saved or default settings.

Now your instrument has all your settings and is ready for implementation in the field.

View the Set Up Demo

Top