View Cart
sales@dataq.com
330-668-1444
RSS FeedsData Acquisition > Current Additional Reading: 4-20 mA Shunt Resistor and Current Loop Data Acquisition Products It seems that at least one 4-20 mA (milliamp) measurement is required by our typical customer, and the way to do it is a constant source of confusion for many. So I thought I’d zero in on the various Read More
Category Archives: Data Acquisition
Performing a Periodic Reset of the Integral Function in Advanced CODAS
Data Acquisition > Software > WinDaq > Advanced CODAS When integrating a waveform using Advanced CODAS, the Periodic Reset feature allows you to reset the integral function after a user-specified period of time (number of data points). In this example, featuring the new Advanced CODAS user interface (in beta), we’ll integrate a flow rate waveform Read More
Displaying Digital Inputs in WinDaq
Data Acquisition > Software > WinDaq It’s come to our attention that there’s some confusion when it comes to enabling a digital channel and displaying digital input in WinDaq Data Acquisition Software. In this example, we’ll enable a digital channel, and show how digital inputs are displayed. Follow Us
.Net Class for Data Acquisition Starter Kits (Beta)
Data Acquisition > Software > .NET Class We’re proud to announce a beta version of a .Net class for data acquisition that supports our newer data acquisition starter kits, models DI-155, -149, and -145. This class provides access to all the hardware’s features from any .Net programming environment. Supported functions are: Connected device discovery Analog Read More
“Cannot allocate socket” Error when Attempting to Set a Static IP Address
Data Acquisition > Ethernet It has come to our attention that many Windows 7 and 8 users are having difficulty assigning static IP addresses to their DI-710, DI-718B and DI-718Bx Ethernet instruments. When choosing ‘Set Static’ from the DATAQ Instruments Hardware Manager pull-down menu, they receive a “Cannot allocate socket” error. The error is the result of security Read More
Low Frequency Measurements Using 8B45 Amplifiers
Data Acquisition > Mixed Measurements DATAQ Instruments sells an amplifier into applications that require frequency measurements in the range of 500 Hz to 100 kHz full scale. The model is DI-8B45, and it’s sold with different suffix numbers that each defines a fixed full scale range in Hz or kHz. The amplifier is useful when Read More
The EL-EnviroPad-TC in Action
Data Logger > Lascar > EL-EnviroPad-TC Witness the EL-EnviroPad-TC in action! Check out the EL-EnviroPad-TC, courtesy of Vine! vine.co/v/bdqeqKtMnFg — DATAQ Instruments (@DATAQ_Inst) March 13, 2013 Click here for more on the EL-EnviroPad-TC. Follow Us
New High Voltage Module for GL7000 Data Acquisition System
Data Logger > Graphtec > GL7000 New GL7-HV Module Measures 2V to 1000V Checkout our latest module release for the GL7000 Data Acquisition and Data Logger System. The new GL7-HV offers two high-voltage measurement channels. It has a measurement range of 2 V to 1000 V full scale across 9 programmable settings, and supports sample Read More
EL-USB Series Data Loggers and Calibration
Data Logger > Lascar Recently, there’s been some confusion when it comes to calibration and EL series temperature data loggers. The fact that we offer a NIST traceable calibration certificate (sold separately) has led some to believe that a certificate must be purchased in order for the logger to be calibrated. On the contrary, EL Read More
An Overview of the All-New GL7000
Data Logger > Graphtec > GL7000 The GL7000 is a modular data acquisition system, configurable for a wide array of industrial applications. The unit is well constructed and has a solid feel. The base unit (without modules) measures 7.60”W x 5.55”H x 6.30”D and weighs in at approximately 4.9 pounds. Expansion modules (at least Read More