View Cart
sales@dataq.com
330-668-1444
RSS FeedsData Acquisition > Software > WinDaq …and it’s Almost Always Line Noise 50/60 Hz line sources abound in conductive and radiated states to create noise in your most carefully-crafted measurements, but sometimes it isn’t obvious that they’re the culprit. At low sample rates line noise can morph into alias frequencies that bear no resemblance to Read More
Category Archives: Data Acquisition
New Engineering Units Beta Software Going Once…
Data Acquisition > Software > WinDaq Our Engineering Units beta software has been available for nearly a week and nary a peep has been heard from those who downloaded it. We take this to be either a very good sign, or our customer’s don’t even know where to begin with their criticism. We know that Read More
The New ‘Engineering Unit Settings’ Calibration Method
Data Acquisition > Software > WinDaq Take a couple minutes and check out this demonstration of our new ‘Engineering Unit Settings’ calibration method. You can perform a two-point calibration to display engineering units (lbs, psi, ect.), or set an offset. Want to try it out for yourself? Download the beta software at: www.dataq.com/DATAQ_EU_SETTINGS.zip (no longer Read More
Download New Engineering Units Settings Beta Software
Data Acquisition > Software > WinDaq WinDaq Playback and Recording software executables that embrace the new Engineering Units definition approach are available at our website. The download is a ZIP file containing new .EXEs that replace the current versions you run, complete details on how to install them, and instructions for how to use the Read More
New Engineering Units Settings Dialog Box Availability
Data Acquisition > Software > WinDaq We apologize for the delay getting the beta of our new Engineering Units scaling approach out to those who have agreed to test it. Those customers should expect an email from us by early next week if not sooner. We drastically underestimated the amount of internal debate that accrued Read More
Answer Four Questions to Define Your Data Logger Product
Data Logger > Products Hardly a day that goes by that we don’t receive an inquiry for a data logger or data acquisition system that goes something like this: We are looking to add a data logger system to our production line and would like to have a system able to record data in real Read More
Engineering Units Scaling and “Set Offset”
Data Acquisition > Software > WinDaq In the previous post we introduced our new WinDaq Engineering Units Scaling dialog box and solicited users for advice and guidance before making it a permanent part of the application. The new approach incorporated a Set Zero button that provided a simple way to compensate for sensors that exhibit Read More
Help Us Out– New Engineering Unit Settings Dialog Box
Data Acquisition > Software > WinDaq Help Us Out We’re looking for customers to test this new WinDaq software approach for defining engineering units and give us their opinions. Currently the new code is available only for starter kits, so anyone with a DI-194(RS), -154RS, -148U, -148U-SP, -158U, -158UP, -145, -149, or DI-155 qualifies. To Read More
Using Graphtec’s PC-based APS Software to Create Reports in Excel
Data Logger > Graphtec For use with Graphtec Data Loggers, Graphtec’s PC-based APS software allows you to create daily or monthly reports by streaming data, in real time, into Microsoft Excel. Follow Us
An Overview of the PC-based APS Software for Graphtec GL Series Instruments
Data Logger > Graphtec The APS PC-based software for Graphtec Data Loggers gives you access to all of the features on the front panel of the instrument, and more. When connected to your PC via the USB or Ethernet interface, the APS software allows you to view real-time data, enable and configure channels, set alarms and generate Read More