View Cart
sales@dataq.com
330-668-14440-300 PSI High Accuracy Pressure Transducers
Pressure Transducer Measures 0-300 PSI
Stock
- Measure pressure from 0-300 PSI
- Made with 316 stainless steel and high temperature auto-graded plastic
- 0.5V – 4.5V linear voltage output
- Accuracy ±0.5%FS.
- Works for oil, fuel, brake fluid, water or air pressure
- Mating connector and wire harness (3 ft pigtail) included
- IP65-66 Rated
- Compatible with many Dataq Instruments hardware products including DI-2108, DI-2108-P, DI-4108, DI-4208, DI-4718B (with appropriate 8B module), and DI-2008/808 (with 15V to 5V DC2DC)
- Customization available on ranges and sealing material
- Learn how to connect and measure PSI with this pressure sensor
Share
Description
The Pressure sensor measures from pressure 0-300 PSI when connected to a Dataq Instruments Data Acquisition product or Data Logger.
The pressure sensor allows Dataq Instruments data acquisition and data logger units to acquire oil, fuel, air, brake fluid (DOT3/DOT4) or water pressure (PSI) information. The combination of these two products provides a compact solution, with transducer excitation provided by the data logger. The logger itself allows data to be communicated to a connected PC over either a USB or Ethernet interface. Optionally, many data loggers can store data to a removable USB thumb drive to satisfy stand-alone applications. Even with a connected pressure sensor, the data logger channel capacity allows additional channels of information to be acquired and correlated with pressure information to satisfy nearly any level of measurement expansion.
Accessories
Description
Allows you to power 5V rating sensor with a battery. Input voltage: DC8-35V, (12V/24V changes to 5V); Output parameter: DC5V 3A, 15W MAX
Description
AC Adapter for Sensor Excitation.: AC input: 100V-240V. DC output: 5V 2A. Cable length: 2.95ft. DC plug connector size: 5.5x2.5mm. Includes screw terminal connector.
Description
10-foot long wire harness (pigtail) with mating connector and seal for pressure transducers
Description
Spare 3-foot long wire harness (pigtail) with mating connector and seal for pressure transducers
Description
To convert pressure transducer fitting from 1/8 NPT to 1/4 MNPT
Max operating pressure: 2000 PSI
Specifications
| Measurement Range: | 2000361-300H: 0 to 300 PSI |
| Material: | 316 stainless steel and high temperature auto-graded plastic |
| Output: | 0.5V – 4.5V linear voltage output |
| Supply Voltage: | 5V +/-5%, 0.02W |
| Long Term Working Temperature: | -40 to +85ºC (-40 to +185ºF) |
| Accuracy: | ±0.5%FS |
| Thread: | 1/8” NPT-27 |
| Protection Class: | Typical IP65-66, depending on electric connection. |
| Overload Capacity: | 2 times. |
| Pressure Medium: | Any gas or liquid compatible with 316L stainless steel |
| Long-term stability: | ± 0.5%FS/year |
| Temperature Effect on Zero: | Typical: ±0.02%FS/ºC Maximum: ±0.05%FS/ºC |
| Temperature Effect on Sensitivity: | Typical: ±0.02%FS/ºC Maximum: ±0.05%FS/ºC |
| Response Time: | ≤1ms |
| Insulation Resistance: | >100mΩ 500VDC |
| Explosion-proof Class: | ExiaTTCT6 |
| Electromagnetism Compatibility: | EN61326-1-2013 EN61325-2-2:2013 EMC Directive 2014/30/EU |
| Wiring connector: | Water sealed quick-disconnect. Mating connector and wire harness (3 ft pigtail) included. |
| Wiring: | Red for +5V Supply Voltage Black for GND Yellow or Green for OUT |
| Warranty: | 90 days |
Logger inaccuracy not included in these specifications.
Articles
Making Pressure Measurements with the DI-1100 Starter Kit
Making Pressure Measurements with a Dataq Data Logger and Pressure Sensor
