View Cart
sales@dataq.com
330-668-1444Customizable High Accuracy Pressure Transducers
Pressure Transducer Measures -14.5 PSI to 10000 PSI
Please specify customized range, supply voltage, process connection and/or sealing material in the order comment area
Order
- Measure pressure from -14.5 to 10000 PSI
- Customization available on ranges, gauge or absolute pressure, sealing material, process connection, and/or supply voltage
- The standard lead time is typically 8 weeks. The order is non-refundable once placed
- Compatible data acquisition devices
- Made with 316 stainless steel and high temperature auto-graded plastic
- 0.5V – 4.5V or 4-20mA linear output
- Accuracy ±0.5%FS.
- Works for oil, fuel, brake fluid, water or air pressure
- Mating connector and wire harness (3 ft pigtail) included
- IP65-66 Rated
- Compatible with many Dataq Instruments hardware products including DI-2108, DI-2108-P, DI-4108, DI-4208, DI-4718B (with appropriate 8B module), and DI-2008/808 (Preferable current output model)
- Markings: CE, ROHS and REACH
- Learn how to connect and measure PSI with this pressure sensor
Share
Description
The Pressure sensor measures from -14.5 PSI to 10000 PSI when connected to a Dataq Instruments Data Acquisition product or Data Logger.
The pressure sensor allows Dataq Instruments data acquisition and data logger units to acquire oil, fuel, air, brake fluid (DOT3/DOT4) or water pressure (PSI) information. The combination of these two products provides a compact solution, with transducer excitation provided by the data logger. The logger itself allows data to be communicated to a connected PC over either a USB or Ethernet interface. Optionally, many data loggers can store data to a removable USB thumb drive to satisfy stand-alone applications. Even with a connected pressure sensor, the data logger channel capacity allows additional channels of information to be acquired and correlated with pressure information to satisfy nearly any level of measurement expansion.
Not all pressure transducers are built the same
The diaphgram of pressure transducers can employ different material and technologies, and each one has its pros and cons. Here is the quick comparison table among the two types we offer
| Product lines | 2000361-H (0.5-4.5V output) 2000361-HX (4-20mA output) 2000361-CH (Customized model) |
2000361 |
| Material/Technologies | Oil-filled diffusion silicon piezoresistive | Dry ceramic capactitive Not recommended for strong EMI environment |
| Output | 2000361-H: 0.5-4.5V 2000361-HX: 4-20mA 2000361-CH: 0.5-4.5V or 4-20mA |
0.5-4.5V |
| Pressure Type | Gauge pressure |
Gauge pressure |
| Customized Pressure Type | Absolute pressure | |
| Accuracy/Sensitivity | ±0.5%FS 15-25°C |
±2% FS |
| Medium | Any gas or liquid compatible with 316L stainless steel (Not intended for acidic medium) |
Any gas or liquid compatible with ceramic |
| Housing Info | Stainless Steel 304, Cu, Al |
Stainless Steel 304, Cu, Al |
| Wetting Material | Stainless Steel 316L | |
| Burst Pressure | For transducers of full range up to 5000 PSI, 4 times span For transducers of full range of 10000 PSI, 26000 PSI |
4 times span |
| Overload Pressure | For transducers of full range up to 5000 PSI, 2.5 times span For transducers of full range of 10000 PSI, 14500 PSI |
2.5 times span |
| Response Time | 1ms | 1ms |
| Working Temperture Range | -40°C to 85°C | -20°C to 70°C |
| Insulation Resistance | 100ma 500VDC | 100ma 500VDC |
| 3D Model | PDF for 1/8 NPT version | |
| Process Connection (Thread) | 1/4" NPT-18 thread for 10000 psi 1/8" NPT-27 thread for the others (1/4 NPT" pipe fitting can be found here) |
1/8" NPT-27 thread (1/4" NPT pipe fitting can be found here) |
| Customized Process Connections | G 1/4, M14x1.5, M12x1.5, 1/4-19PT | |
| Electromagnetism Compatibility | EN61326-1:2013 EN61326-2-2:2013 The EMC Directive2014/30/EU |
EN61326-1:2013 EN61326-2-2:2013 The EMC Directive2014/30/EU |
| Supply Voltage | 4.75-5.25V for 2000361-H (0.5-4.5V output model) 8-30V for 2000361-HX (4-20mA output model) |
4.75-5.25V |
| Max Power Consumption | 0.05W for 2000361-H (0.5-4.5V output model) |
0.05W |
| Sealing Material | NBR rubber |
NBR rubber |
| Included Wiring Harness | 3 ft (10ft harness can be found here) | 3 ft (10ft harness can be found here) |
| Standard Ranges | -14.5 to 15, 30 psi 0 to -14.5, 15, 30, 50, 60, 100, 150, 200, 300, 500, 1000,
1500, 2000, 3000, 5000, 10000 psi |
0 to 30, 50, 60, 100, 150, 200, 500 psi |
| Customized Ranges | -14.5 psi to 10000 psi | NA |
| Warning | Avoid sudden and strong pressure changes, like a square wave, as this can cause a water hammer effect, leading to permanent damage to the pressure sensor. Adjust pressure gradually to ensure sensor longevity. | |
| Cost | $
68
for 2000361-H (0.5-4.5V output model) $ 79 for 2000361-HX (4-20mA output model, 250 Ohm shunt resistor included) $ 99 for 2000361-CH (Typical lead time, 8 weeks) |
$ 39.99 |
Accessories
Description
Allows you to power 5V rating sensor with a battery. Input voltage: DC8-35V, (12V/24V changes to 5V); Output parameter: DC5V 3A, 15W MAX
Description
10-foot long wire harness (pigtail) with mating connector and seal for pressure transducers
Description
Spare 3-foot long wire harness (pigtail) with mating connector and seal for pressure transducers
Description
To convert pressure transducer fitting from 1/8 NPT to 1/4 MNPT
Max operating pressure: 2000 PSI
Specifications
| Measurement Range: | 2000361-CH: Customized range, sealing material and/or supply voltage |
| Material: | 316 stainless steel and high temperature auto-graded plastic |
| Output: | 0.5V – 4.5V voltage or 4-20mA current linear output |
| Supply Voltage: | 4.75V-5.25V for voltage output model 8-30V for current output model |
| Long Term Working Temperature: | -40 to +85ºC (-40 to +185ºF) |
| Accuracy: | ±0.5%FS |
| Process Connection (Thread) | Default: 1/4”-18 NPT for 10000 PSI 1/8”-27 NPT for others Customizable: G1/4, 1/4 NPT, G 1/8, 1/8 NPT, M12x1.5, M10x1, 7/16-UNF Female |
| Protection Class: | Typical IP65-66, depending on electric connection. |
| Overload Capacity: | 2 times. |
| Pressure Medium: | Any gas or liquid compatible with 316L stainless steel |
| Long-term stability: | ± 0.5%FS/year |
| Temperature Effect on Zero: | Typical: ±0.02%FS/ºC Maximum: ±0.05%FS/ºC |
| Temperature Effect on Sensitivity: | Typical: ±0.02%FS/ºC Maximum: ±0.05%FS/ºC |
| Response Time: | ≤1ms |
| Insulation Resistance: | >100mΩ 500VDC |
| Explosion-proof Class: | ExiaTTCT6 |
| Electromagnetism Compatibility: | EN61326-1-2013 EN61325-2-2:2013 EMC Directive 2014/30/EU |
| Wiring connector: | Water sealed quick-disconnect. Mating connector and wire harness (3 ft pigtail) included. |
| Wiring: | Red for +5V Supply Voltage Black for GND (Voltage output model) or Output (Current output model) Yellow or Green for OUT (Voltage output model) |
| Warranty: | 90 days |
Logger inaccuracy not included in these specifications.
Articles
Making Pressure Measurements with the DI-1100 Starter Kit
Making Pressure Measurements with a Dataq Data Logger and Pressure Sensor
