Site Search:

4-20mA Linear Output Pressure Transducers

Description

The 4-20mA Linear Output Pressure sensor measures-14.5 up to 10000 PSI when connected to a Dataq Instruments Data Acquisition product or Data Logger.

The pressure sensor allows Dataq Instruments data acquisition and data logger units to acquire oil, fuel, air, brake fluid (DOT3/DOT4) or water pressure (PSI) information. The combination of these two products provides a compact solution, with transducer excitation provided by the data logger. The logger itself allows data to be communicated to a connected PC over either a USB or Ethernet interface.


Product Features

  • Measure pressure from -14.5 PSI to 10000 PSI
  • Made with 316 stainless steel and high temperature auto-graded plastic
  • 4-20mA linear output
  • Accuracy up to 0.5%FS.
  • Works for oil, fuel, brake fluid, water or air pressure
  • Mating connector and wire harness (pigtail) included
  • IP65-66 Rated
  • Compatible with many Dataq Instruments hardware products including DI-2108, DI-2108-P, DI-4108, DI-4208, DI-2008/808, and DI-4718B (with appropriate 8B module)

Products in the Series

 

 

 

Not all pressure transducers are built the same

The diaphgram of pressure transducers can employ different material and technologies, and each one has its pros and cons. Here is the quick comparison table among the two types we offer

Product lines

2000361-H (0.5-4.5V output)

2000361-HX (4-20mA output)

2000361-CH (Customized model)

2000361
Material/Technologies Oil-filled diffusion silicon piezoresistive Dry ceramic capactitive
Not recommended for strong EMI environment
Output

2000361-H: 0.5-4.5V

2000361-HX: 4-20mA

2000361-CH: 0.5-4.5V or 4-20mA

0.5-4.5V
Pressure Type

Gauge pressure

Customization to Absolute pressure is available

Gauge pressure
Accuracy/Sensitivity ±0.5%FS
* Ranges lower than +5 PSI has 0.5-1% accuracy
±2% FS
Medium Any gas or liquid compatible with 316L stainless steel
(Not intended for acidic medium)
Any gas or liquid compatible with ceramic
Burst Pressure For transducers of full range up to 5000 PSI, 4 times span
For transducers of full range of 10000 PSI, 26000 PSI
4 times span
Overload Pressure For transducers of full range up to 5000 PSI, 2.5 times span
For transducers of full range of 10000 PSI, 14500 PSI
2.5 times span
Response Time 1ms 1ms
Working Temperture Range -40°C to 85°C -20°C to 70°C
Insulation Resistance 100ma 500VDC 100ma 500VDC
3D Model 1/4 NPT version  
Process Connection (Thread) 1/4" NPT-18 thread for 10000 psi
1/8" NPT-27 thread for the others (1/4 NPT" pipe fitting can be found here)
1/8" NPT-27 thread (1/4" NPT pipe fitting can be found here)
Electromagnetism Compatibility EN61326-1:2013
EN61326-2-2:2013
The EMC Directive2014/30/EU
EN61326-1:2013
EN61326-2-2:2013
The EMC Directive2014/30/EU
Supply Voltage 4.75-5.25V for 2000361-H (0.5-4.5V output model)

8-30V for 2000361-HX (4-20mA output model)
4.75-5.25V
Max Power Consumption

0.05W for 2000361-H (0.5-4.5V output model)

25mA*SupplyVoltage for 2000361-HX (4-20mA output model)

0.05W
Sealing Material NBR rubber
NBR rubber
Included Wiring Harness 3 ft (10ft harness can be found here) 3 ft (10ft harness can be found here)
Standard Ranges

-14.5 to 15, 30 psi

0 to -14.5, 15, 30, 50, 60, 100, 150, 200, 300, 500, 1000, 1500, 2000, 3000, 5000, 10000 psi

Customization available

0 to 30, 50, 60, 100, 150, 200, 500 psi
Customized Ranges -14.5 psi to 10000 psi NA
Cost $ 68 for 2000361-H (0.5-4.5V output model)

$ 79 for 2000361-HX (4-20mA output model, 250 Ohm shunt resistor included)

$ 99 for 2000361-CH (Typical lead time, 8 weeks)
$ 39.99

 

Videos

Learn how to make 4-20mA current measurements using the R250 shunt resistor.