Site Search:

0-500 PSI High Accuracy Pressure Transducers

Pressure Transducer Measures 0-500 PSI


  • Measure pressure from 0-500 PSI
  • Made with 316 stainless steel and high temperature auto-graded plastic
  • 0.5V – 4.5V linear voltage output, for 4-20mA output version, please check this out
  • Accuracy ±0.5%FS.
  • Works for oil, fuel, brake fluid, water or air pressure
  • Mating connector and wire harness (pigtail) included
  • IP65-66 Rated
  • Compatible with many Dataq Instruments hardware products including DI-2108, DI-2108-P, DI-4108, DI-4208, DI-4718B (with appropriate 8B module), and DI-2008/808 (with 15V to 5V DC2DC)
  • Customization available on ranges and sealing material
  • Learn how to connect and measure PSI with this pressure sensor
Tweet this page Like this product on Facebook Share this page on LinkedIn Email this page
0-100 PSI, ±0.5% Accuracy  Pressure Sensor


The Pressure sensor measures from pressure 0-500 PSI when connected to a Dataq Instruments Data Acquisition product or Data Logger.

The pressure sensor allows Dataq Instruments data acquisition and data logger units to acquire oil, fuel, air, brake fluid (DOT3/DOT4) or water pressure (PSI) information. The combination of these two products provides a compact solution, with transducer excitation provided by the data logger. The logger itself allows data to be communicated to a connected PC over either a USB or Ethernet interface. Optionally, many data loggers can store data to a removable USB thumb drive to satisfy stand-alone applications. Even with a connected pressure sensor, the data logger channel capacity allows additional channels of information to be acquired and correlated with pressure information to satisfy nearly any level of measurement expansion.




DC/DC Converter for Sensors

DC/DC Converter


Allows you to power 5V rating sensor with a battery. Input voltage: DC8-35V, (12V/24V changes to 5V); Output parameter: DC5V 3A, 15W MAX


Spare wire harness with mating connector

DC/DC Converter


Spare 3-foot long wire harness (pigtail) with mating connector and seal for pressure transducers


Measurement Range: 2000361-500H: 0 to 500 PSI
Material: 316 stainless steel and high temperature auto-graded plastic
Output: 0.5V – 4.5V linear voltage output
for 4-20mA output version, please check this out
Supply Voltage: 5V +/-5%, 0.02W
for 8-30V version, please check this out
Long Term Working Temperature: -40 to +85ºC (-40 to +185ºF)
Accuracy: ±0.5%FS
Thread: 1/8” NPT-27
Protection Class: Typical IP65-66, depending on electric connection.
Overload Capacity: 2 times.
Pressure Medium: Any gas or liquid compatible with 316L stainless steel
Long-term stability: ± 0.5%FS/year
Temperature Effect on Zero: Typical: ±0.02%FS/ºC
Maximum: ±0.05%FS/ºC
Temperature Effect on Sensitivity: Typical: ±0.02%FS/ºC
Maximum: ±0.05%FS/ºC
Response Time: ≤1ms
Insulation Resistance: >100mΩ 500VDC
Explosion-proof Class: ExiaTTCT6
Electromagnetism Compatibility: EN61326-1-2013
EMC Directive 2014/30/EU
Wiring connector: Water sealed quick-disconnect. Mating connector and wire harness (pigtail) included.
Wiring: Red for +5V Supply Voltage
Black for GND
Yellow or Green for OUT
Warranty: 90 days

Logger inaccuracy not included in these specifications.

Compatible Products

Products compatible withTransducer with 4-20mA output